Photo: Abstract image of light rays

Insights

Blog | The Latest

How Do You De-ice a Drone?

Icing is a serious problem for unmanned aerial vehicles (commonly called UAVs or drones). But anti-icing systems designed for commercial aircraft are too bulky, too heavy or require an on-board pilot to turn them on. What’s a drone to do?

What’s the big deal with ice and UAVs?

Ice can build up on aircraft either through precipitation on the ground or by formation of ice on the wings, engine inlet and other surfaces during flight. The ice can add dangerous extra weight. It also changes the wing profile, increasing drag and reducing lift. Eventually, the ice will cause the aircraft to crash.

For drones, which are usually much smaller than a commercial airliner, even a little bit of ice can add up to a big problem. This limits the range, altitude and duration of unmanned missions.

Why can’t drones use traditional aircraft de-icing systems?

Airliners use mechanical or chemical deicing systems that can add significant weight to the aircraft design. They can also require considerable re-engineering of the aircrafts wings. Many of these systems also require a pilot who can manually turn on a deicing system when it is needed.

Ice protection systems used for drones have more design restrictions. High- and medium-altitude UAVs are typically designed to be light and aerodynamic to minimize fuel needs, provide adequate payload capacity and extend mission range. A system for a UAV must be very light and have minimal impact on aerodynamic features to avoid unfavorable impact on aircraft performance.

Drones also have a pilot who is located remotely from the drone during flight. This means that an ice protection system for a UAV has to be smart enough to turn on by itself while the drone is in flight or be controllable by the remote pilot.

How can conductive coating be used to de-ice drones?

Battelle material scientists have developed a new conductive coating called HeatCoat™, which can be applied as a uniform, nearly invisible layer to the drone’s wings. Under icing conditions, the entire conductive layer rapidly heats up when electricity is applied.

Want to learn more? See how HeatCoat works in the video below.

Posted
April 23, 2015
Author
Battelle Staff
Estimated Read Time
2 Mins
Stay In the Know

Get Battelle Insights in Your Inbox

Get Updates

Related Blogs

BATTELLE UPDATES

Receive updates from Battelle for an all-access pass to the incredible work of Battelle researchers.


View all blog articles

Events | Upcoming

Case Studies

View All Case Studies

Press Releases


View all Press releases


Visit our youtube page

Sign Up for Battelle Updates

Follow along with the latest news, announcements and updates from our Battelle community of solvers.